Perkins 404C-22T - Backplate and Rear Oil Seal

13
Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green 101
400 Series
Backplate and rear oil seal
To remove and to fit Operation 13-5
Only the 404C-22 engines / models have the backplate and the housing fitted together.
Note: On assembly ensure that Powerpart silicone sealant is used between the cylinder block and the rear
end oil seal.
Engine Torque Nm (lbf ft) kgf m
403C-11
Setscrew - backplate 50 (36.9) 5,1
Setscrew - housing 50 (36.9) 5,1
403C-15
404C-22
404C-22T
Setscrew - backplate 25 (18.8) 2,6
Setscrew - housing 25 (18.8) 2,6
H1110
1
2