Perkins M216C - Page 15

KENR9126 15
Troubleshooting Section
On – Thelampwillilluminatewhenalowoilpressure
event is detect
ed. The “Warning” lamp and the
“Diagnostic” lamp may also illuminate.
Low Coolant Le
vel
Lamp check – When the keyswitch is turned to
ON, the lamp w
ill illuminate for 2 seconds. The lamp
will then be extinguished unless there is an active
warning.
On – The lamp will illuminate when a low coolant
level event is detected. The “Warning” lamp and the
“Diagnosti
c” lamp may also illuminate.
High Coolant Temperature
Lamp check – When the keyswitch is turned to
ON, t he lamp will illuminate for 2 seconds. The lamp
will then b
eextinguishedunlessthereisanactive
warning.
On – Th e la
mp will illuminate when a high coolant
temperature event is detected. The “Warning” lamp
and the “Diagnostic” lamp may also illuminate.
Maintenance Clear
Lamp che
ck – When the keyswitch is turned to
ON, t he lamp will illuminate for 2 seconds. The lamp
will then be extinguished unless there is an active
warnin
g.
On – The lamp will illuminate when a maintenance
clear e
vent is detected. The “Warning” lamp and the
“Diagnostic” lamp may also illuminate.
Water
In Fuel
Lamp check – When the keyswitch is turned to
ON, th
e lamp will illuminate for 2 seconds. The lamp
will then be extinguished unless there is an active
warning.
On – The lamp will illuminate when a water in fuel
event is detected. The “Warning” lamp and the
“Dia
gnostic” lamp may also illuminate.
Col
or of Lamps
Typically, the “Warning” lamp is colored red and the
“Di
agnostic” lamp is colored amber. The other lamps
are optional.