New Vehicle Maintenance
Schedule
First Day
First Day
Perform a total vehicle alignment once a body is installed on the truck chassis.
Steering U-joint Pinch Bolt
• Refer to Steering Shaft Bolt Torque Specifications on page 267 for maintenance instructions.
Front Suspension - U-bolts
• Check the general condition and the tightness of the nuts. Tighten the U-bolts using a calibrated torque wrench to the specified
torque value. (Refer to Suspension U-Bolts, Grade 8 on page 280 for maintenance instructions.)
First 50-100 mi / 80-160 km
First 50-100 mi / 80-160 km
5
Wheel Mounting
• Refer to Wheels on page 271 for maintenance instructions.
5
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - New Vehicle Maintenance Schedule
Y53-6076-1D1 (09/20) 169
5
To Next Page
Loading...
