Steering Column Controls
1. Engine brake (optional
transmission shifter)
2. Tilt/telescope lever
3. Turn signal/wiper/lights
The turn signal lever is mounted on the left
side of the steering column. The lever
controls several functions: turn signal, high
beam, and windshield wiper control. The
turn signal lever will only operate when the
key is in the ignition in the ACC position.
Tilt/Telescoping Steering Wheel
Depending on your vehicle’s configuration,
you may have either a tilt/telescoping
feature.
• The tilt feature allows forward and
rearward movement of the wheel.
• The telescoping feature allows you
to move the wheel up and down.
WARNING
Make all adjustments to the steering
mechanism while the vehicle is stop-
ped. Adjusting the Tilt Telescoping
Steering Wheel while the vehicle is in
motion could cause loss of control.
You would not be able to steer proper-
ly and could have an accident resulting
in death or personal injury.
How to Adjust Tilt/Telescoping
Steering Column
WARNING
Make all adjustments to the steering
mechanism while the vehicle is stop-
ped. Adjusting the Tilt Telescoping
Steering Wheel while the vehicle is in
motion could cause loss of control.
You would not be able to steer proper-
ly and could have an accident resulting
in death or personal injury.
1. Push and hold the Tilt
Telescopinglever down fully.
2. Push or pull the steering wheel to
the desired height and angle.
3. Push the Tilt Telescoping lever
back into the locked position.
How to Use the Turn Signal
The lever-action turn signal/high beam
switch is located on the left side of the
steering column. The ignition key must be
turned to ON for the signal/switch to
operate.
CONTROLS - Steering Column Controls
Y53-6076-1D1 (09/20) 99
3
To Next Page
Loading...
