Peterbilt 365 - Every 120,000 MI; 192,000 Km; Annually

Every 60,000 mi / 96,000 km / 6 Months
14
Air - Inline Filters
• Replace elements or clean with solvent. (Refer to Air Cleaners on page 247 for maintenance instructions.)
Every 120,000 mi / 192,000
km / Annually
Every 120,000 mi / 192,000 km / Annually
15
Frame - Frame Fasteners
• Check for tightness: tighten to the specified torque value as required. (Refer to Frame Fastener Torque Requirements on page
279 for maintenance instructions.)
Frame - Crossmembers and Mounting Brackets
• Inspect for cracks and loose fasteners. Replace or tighten to the specified torque value as required. (Refer to Frame Fastener
Torque Requirements on page 279 for maintenance instructions.)
14
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
*
Use only Spicer Driveshaft approved lubricants when greasing Spicer U-joints.
15
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 120,000 mi / 192,000 km / Annually
200 Y53-6076-1D1 (09/20)
5