Peterbilt 365 - Every 500,000 MI; 800,000 Km; 5 Years

Every 500,000 mi / 800,000
km / 5 years
Every 500,000 mi / 800,000 km / 5 years
18
Front Axle - Linehaul (PACCAR) - Steer Axle Wheel Ends: Oil Bath LMS
• Synthetic SAE 75W-90. (Refer to Front Axle and Suspension on page 252 for maintenance instructions.)
Drive Axle - Linehaul (PACCAR) - Axle Assembly
• Drain and replace SYNTHETIC BASE lubricant. (Refer to Rear Axle Lubrication on page 261 for maintenance instructions.)
Hub, Drum, and Hubcap - LMS Hubs (Dana) with Synthetic Lubricant
• Service the bearings, seals and oil. This interval may be different depending on the results of the regular inspection. (Refer to
Wheels on page 271 for maintenance instructions.)
Main and Auxiliary Transmission - Main and Auxiliary Transmission (ON HIGHWAY)
• Drain lubricant while warm. Flush each unit with clean flushing oil. (Refer to Transmission Maintenance on page 272 for
maintenance instructions.)
Every 750,000 mi /
1,200,000 km/ 24,000
Hours / 8 years
18
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 500,000 mi / 800,000 km / 5 years
Y53-6076-1D1 (09/20) 207
5