Component Specific
Intervals
These maintenance tasks should be
reviewed at each maintenance interval.
They are not specific to one interval.
Component Specific Intervals
10
Drive Axle (Dana) - Axle Housing Drive Axle - Dana on page 262
Drive Axle (Meritor Line Haul / ON HIGHWAY) Drive Axle - Meritor on page 262
Drive Axle (Meritor City Delivery / OFF HIGHWAY) Drive Axle - Meritor on page 262
Front Axle - Vocational (PACCAR) - Kingpin Bushings, Thrust Bearings, and Tie Rod Ball Ends
• Lubricate with approved grease. Weekly regardless of mileage. (Refer to Front Axle and Suspension on page 252 for
maintenance instructions.)
Front Axle - Vocational (PACCAR) - Steering Knuckle Spindles, Thrust Bearings, Kingpins, Drawkeys, Tie Rod Ends, Steering Stops,
and Bushings
• Inspect for wear and damage and for endplay. Shim or replace as required. Weekly regardless of mileage. (Refer to Front Axle
and Suspension on page 252 for maintenance instructions.)
Air Intake - Air filter
• Replace the engine intake air filter element. When required by air restriction indicator or required by the engine manufacturers
operator manual. (Refer to Replacing the Engine Air Intake Filter on page 247 for maintenance instructions.)
10
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Component Specific Intervals
178 Y53-6076-1D1 (09/20)
5
To Next Page
Loading...
