EasyManua.ls Logo

Peterbilt 365 - Page 195

Peterbilt 365
308 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Every 60,000 mi / 96,000 km / 6 Months
14
Drive Axle (Dana) - Lube Filter (OFF HIGHWAY)
Change. (Refer to Drive Axle - Dana on page 262 for maintenance instructions.)
Drive Axle (Dana) - Magnetic Drain Plug and Breather (OFF HIGHWAY)
Clean or replace. (Refer to Drive Axle - Dana on page 262 for maintenance instructions.)
Drive Axle (SISU) - Axle Housing
Check the wheel bearing hubs and adjust if necessary. (Refer to Drive Axle (SISU) Inspection on page 264 for maintenance
instructions.)
Visually inspect for damage or leaks. (Refer to Drive Axle (SISU) Inspection on page 264 for maintenance instructions.)
Check the oil level in the differential carrier and hubs. (Refer to Drive Axle (SISU) Oil Servicing on page 264 for maintenance
instructions.)
Drive Axle (SISU) - Breather
Check the breather for proper operation. (Refer to Drive Axle - SISU Breather and Brakes on page 264 for maintenance
instructions.)
Drive Axle (SISU) - S-cam Brakes
Overhaul the brakes: degrease all moving parts, check the bushings and seals for wear. (Refer to Drive Axle - SISU Breather
and Brakes on page 264 for maintenance instructions.)
Rear Suspension - U-bolts
Check the torque. Tighten to specified torque value as required. (Refer to Suspension U-Bolts, Grade 8 on page 280 for
maintenance instructions.)
14
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 60,000 mi / 96,000 km / 6 Months
Y53-6076-1D1 (09/20) 193
5

Table of Contents

Related product manuals