Every 60,000 mi / 96,000 km / 6 Months
14
Steering Components - Drag link Tube Clamp and Ball Socket
• Check the torque: tighten to specified torque value as required. (Refer to Steering System on page 265 for maintenance
instructions.)
Steering Components - Pitman Arm Clamp Bolt and Nut
• Check the torque: tighten to specified torque value as required. (Refer to Steering System on page 265 for maintenance
instructions.)
Steering Components - Steering Intermediate Shaft
• Check the torque on the pinch bolt and nut. (Refer to Steering Shaft Bolt Torque Specifications on page 267 for maintenance
instructions.)
Steering Components - Steering Intermediate Shaft U-joints (ON HIGHWAY)
• Lubricate [EP NLGI #2 HD grease, -10 to 325°F (-23 to 163°C) range]. (Refer to Steering System on page 265 for maintenance
instructions.)
Fuel and Tanks - Fuel Tanks
• Inspect tanks, brackets, hoses, and fittings for correct location, tightness, abrasion damage, and leaks: repair or replace as
required. (Refer to Fuel Tank on page 250 for maintenance instructions.)
Driveshafts - Models SPL- 140/140HD/170/170HD/250/250HD Slip Members and U- joints (ON HIGHWAY and LINEHAUL)
• Lubricate *
Battery Boxes, Tool Boxes, and Steps - Batteries (ON HIGHWAY and LINE HAUL)
• Check for cracks and damage, electrolyte level, condition of terminals, and tightness of hold downs. Refer to Batteries on page
237 for maintenance instructions.
14
Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.
MAINTENANCE - Every 60,000 mi / 96,000 km / 6 Months
Y53-6076-1D1 (09/20) 197
5
To Next Page
Loading...
