WARNING
DO NOT remove, modify, or replace
the tether
belt system with a different
tether system. A failed or missing teth-
er belt could allow the seat base to
fully extend in the event of an acci-
dent. Failure to comply may result in
death or personal injury.
WARNING
Failure to adjust external tether belts
properly can
cause excessive move-
ment of the seat in an accident. Tether
belts should be adjusted so that they
are taut when the seat is in its most
upward and forward position. Failure
to comply may result in death or per-
sonal injury.
Adjust an external tether by either
lengthening or shortening the strap. To
lengthen it:
1.
Turn the buckle to a right angle to
the webbing.
2. Then pull the buckle.
3. To shorten the tether, pull on the
strap.
Komfort Latch Feature
WARNING
DO NOT set the Komfort Latch with
too much
slack. Too much slack may
reduce the effectiveness of the seat
belt. Failure to comply may result in
death or personal injury.
To eliminate cinching, simply activate the
Komfort Latch device located on the seat
belt webbing at the appropriate time:
1. Adjust the seat to its proper driving
position.
2.
Latch the seat belt.
3. If available, adjust the seat belt
height adjuster to a comfortable
driving position.
4.
While seated appropriately, push
the "on" button to engage the
Komfort Latch.
5. Learn forward in the seat until you
hear a "click."
6. Return to normal driving position,
and the Komfort Latch maintains
the preset amount of tension relief.
More information and video tutorials can be
found at: http://www.clicktugsnug.com/
To disengage the mechanism unbuckle the
seat belt and then press the OFF button of
the Komfort Latch or tug on the shoulder
strap.
SAFETY - Safety Restraint Belts
Y53-6076-1D1 (09/20) 23
1
To Next Page
Loading...
