on. Headlights will turn on if the windshield
wipers are turned on. Manually turning the
headlights on and then off will override this
function until the next time the vehicle is
turned on.
CAUTION
If you have confirmed there is a prob-
lem in the low beam wiring circuit, pro-
ceed with caution to the next available
exit/turnoff and safely pull your vehicle
completely off the road and call for as-
sistance. Driving your vehicle with the
headlamps on high beam (at reduced
intensity) for a prolonged period could
lead to an injury accident. Contact
your nearest dealer to have the prob-
lem corrected as soon as possible.
If the vehicle has LED headlights, the
operator can turn on the mirror heat switch
to heat up the lens of the headlights and
remove any condensation.
Lights, Marker/Clearance
Turn switch on to control Cab and Vehicle
Marker/Clearance lights.
NOTE
An interrupt switch for the trailer mark-
er lights is mounted on the end of the
turn signal lever.
Lights, Marker/Clearance/Trailer
Turn switch on to control trailer marker/
clearance lights separately from the vehicle
marker/clearance lights.
Lights, Park Light
Turn switch on for Park Lights. When the
Park Lights are on the dash lights, side and
tail lights are also on.
Lights, Spot
Turn switch on for Spot Light.
Mud and Snow Traction Control
Momentarily push switch in to engage
Traction Control (TC).
CONTROLS - Dash Switches
94 Y53-6076-1D1 (09/20)
3
To Next Page
Loading...
