Installation and commissioning
8 - 4
8.02 Commissioning
● Check the machine, in particular the electrical leads, for any damage.
● Clean the machine thoroughly, also see Chapter 10 Care and Maintenance.
● Have mechanics ensure that the machine’s motor can be operated with the available
electricity supply and that it is connected correctly. If not, the machine must not
be
operated under any circumstances.
● The balance wheel must rotate towards the operator when the machine is running. If
not, have the motor connection changed by a mechanic.
8.03 Switching the machine on / off
● Switch the machine on or off by turning
the on/off switch 1.
The on/off switch shown in the
illustration is found on
machines with Quick motors. If
another motor is used, other
switches may be fitted.
Fig. 8 - 06
1
To Next Page
Loading...
