Input
57
11.08 List of parameters
The parameter setting values my only be altered by appropriately trained staff!
Group
Gruppe
Parameter
Parameter
Description
Bedeutung
Setting
range
Set value
000 001
Maximum speed
This parameter is used to fix the max.
sewing speed (upper limit).
500 - 2500 2500
002 Sewing speed for start stitches
With this parameter the speeds for
the 5 start stitches are fixed.
Speed (spm) for start stitch no.
1
Speed (spm) for start stitch no.
2
Speed (spm) for start stitch no.
3
Speed (spm) for start stitch no.
4
Speed (spm) for start stitch no.
5
500 - 2500
500 - 2500
500 - 2500
500 - 2500
500 - 2500
500
900
2500
2500
2500
003 Locking/releasing seam patterns
This parameter is used to release (ON)
or lock (OFF) the individual seam
patterns (
0 to 99) to be carried out in
the sewing mode.
ON - OFF ON
004
Switch bobbin thread counter on/off
Standard value (pieces per bobbin)
In the sewing mode, the bobbin thread
counter counts the pieces sewn back
-
wards from the standard value. If the
bobbin thread counter is
switched on, in the sewing mode a
signal is given when the value
0 is re-
ached.
ON - OFF
1 - 9999
OFF
005 Sequence combination
This parameter is used to combine se
-
veral sequences with each other.
0 = no combination
1 = C1 with C2
2 = C2 with C3
3 = C1 with C3
4 = C1 with C2 and C3
0 - 4
0
To Next Page
Loading...
Need help?
General
