Input
53
COPY
COPY 01 02
11.07.05 Copying data into the machine memory
Call up the program management, see Chapter 11.07.01 Calling up the program
management.
●
Press the left +/- keys until the corresponding menu item appears.
Confirm the selection of the menu item with the "Enter" function by pressing the right
plus key
.
●
●
Press the corresponding +/- keys to select the data to be copied from the
SD-memory card into the machine memory:
MD = machine parameters
50 - 99 = programs
ALL = all programs
The copying process is started with the "Enter" function by pressing the right plus key
.
If the data for copying already exists, a safety enquiry appears before overwri
-
ting the data. Press the right plus key to confirm the copying process. The co-
pying process can be stopped by pressing the right minus key.
When the left +/- keys
are pressed, the other menu items of the program management
are called up.
●
●
●
To Next Page
Loading...
Need help?
General
