Input
49
DIR
11.07 Program Management
IIn the program management the programs filed in the machine memory or on connected
SD-memory cards are displayed and can be deleted or copied. Commercially available
SD-memory cards with a storage capacity of max. 512 MB can be inserted in the control
panel. The data is stored in machine-relevant sub-directories. The way to insert or remove the
SD-memory card is described in Chapter 9.07
The programs 50 – 99 are stored in the files 50 – 99 and
the machine data in the file
MD.
Should the SD-memory cards need to be formatted by the PC, they must be formatted
in the format “FAT16”. Alternatively the SD-memory cards can also be formatted on the
corresponding machine with the formatting function, see Chapter 11.10.08 Formatting the
SD-memory card.
11.07.01 Calling up the program management
Switch on the machine.
Call up the program management
●
●
●
●
After the program management has been called up, the first menu item appears (display of
data in the machine memory).
Confirm the selection of the menu item with the "Enter" function by pressing the right
plus
key. In this example the contents of the machine memory are then displayed.
It is possible to scroll through the other menu points by pressing the left +/- key (see follo-
wing chapters).
The following menu items are available in the program management:
Display data in the machine memory
Display data on the connected SD-memory card
Copy data to the SD-memory card
Copy data to the machine memory (from the SD-memory card)
Delete data in the machine memory
Delete data on SD-memory card
Format SD-memory card
●
●
●
●
●
●
●
To Next Page
Loading...
Need help?
General
