2
Fig. 7 - 01
7 Controls
7.01 On/Off switch
● Turn the machine on/off by pressing the
On/Off switch 1.
● With the buttons 2 the parameters, such
as back-tacking function, raising the
presser foot, needle position at sewing
stop etc., can be pre-selected (also see
the Motor Instruction Manual).
2
7.02 Pedal
0 = Neutral position
1 = Sewing
2 = Raise presser foot (on machines with
automatic presser foot lift –910/93)
3 = Trim thread (on mahcines with thread
trimmer –900/93)
Fig. 7 - 02
0
1
2
3
1
To Next Page
Loading...
