Pfaff 9063 - Mounting the Sewing Head; Mounting the Balance Wheel

Mounting and commissioning the machine
8 - 3
76-009
8.01.03 Mounting the sewing head
● Insert both hinges 1 in the corresponding
holes in the bedplate of the sewing head.
● Insert the sewing head with hinges 1 into
the rear rubber pads.
Fig. 8 - 04
1
76
-
010
8.01.04 Mounting the balance wheel
● Fit balance wheel 1 and fasten it with 2
screws 2.
The balance wheel must only be
mounted on machines without a
synchronizer.
Fig. 8 - 05
1
2
2