When the Group 2-B stitches 00-05, 45 and
Group 3-C stitches 01-02, 04, 18 are selected,
the machine will immediately sew 3 locking
stitches when the Auto-lock button is pressed,
then will automatically stop.
The LCD screen will display the figure " " until
the locking stitches stop.
Auto-lock button
To stop machine at the end of the current stitch or
to sew a single stitch (except Group 2-B stitches
00-05, 27-49 and Group 3-C stitches 00-02, 04, 18),
press the Auto-lock button, the machine will sew 3
locking stitches at the end of the current stitch and
automatically stop.
The LCD screen will display the Auto-stop figure
" " until the feature is cancelled.
The function will be cancelled if you press the
button once again or select another stitch.
10
Reverse button
The following stitches can be sewn in reverse:
Group 2-B stitches 00-06, 27-29; Group 3-C
stitches 00-01, 04. After selecting the stitch, press
the reverse button. An arrow " " will display on the
LCD screen while stitching in reverse. The machine
will sew forward after the button is released.
The reverse button can be used to sew a
reinforcement stitch for the following stitches: Group
2-B stitches 07-26, 50-92; Group 3-C stitches 03, 05-
24; Group 4-D stitches 00-78. After selecting the
stitch, press the reverse button. A reinforcement
stitch sews at a low speed and the machine will
automatically stop.
OPERATION BUTTONS
INSTRUCTIONS
To Next Page
Loading...
Need help?
General
