PATTERN BALANCE ADJUSTMENT
If decorative stitches, letters, numbers or the manual buttonhole are uneven when sewn
on a particular fabric, adjust them with the stitch adjustment dial. Use a coin or
screwdriver to turn the dial slightly toward the "+" or " ".
The stitch adjustment dial normally should be in
the horizontal position.
Adjusting distorted stretch stitch stitches
A. When stitches are too compressed, correct by
turning the dial in the direction of " ".
B. Correct setting.
C. When stitches are too drawn out, correct by
turning the dial in the direction of "+".
Adjusting distorted letters or numbers
A. When the letters or numbers are overlap, turn
the dial to " ".
B. Correct setting.
C. When the stitches are too drawn out, correct
by turning the dial to "+".
44
Note: Always test sew the stitch on a piece of fabric that is the same as the fabric used for
your project.
Adjusting the stitch density for buttonhole
A. Buttonhole is too dense, correct by turning the
dial to " ".
B. Correct setting.
C. Buttonhole is less dense, correct by turning
the dial to "+".
SEWING BASICS
To Next Page
Loading...
