1. Baste the zipper opening on the garment.
2. Fold the garment back to the left seam
allowance. Turn under the right seam
allowance to form a 3mm (1/8 inch) fold.
3. Attach the zipper foot. Attach the left side of
the presser foot pin to the presser foot holder
when sewing the right side of the zipper.
Attach the right side of the presser foot pin to
the presser foot holder when sewing the left
side of the zipper.
4. Stitch the left side of the zipper from bottom to
top.
5. Turn the fabric right side out, stitch across the
lower end and right side of zipper.
6. Stop about 5cm (2 inches) from the top of
zipper. Remove the basting and open the
zipper. Stitch the remainder of the seam.
55
Inserting a side zipper
To Next Page
Loading...
