15
Twin needle button
Mirror imaging the stitch appears on the LCD
screen.
A - Normal
B - Mirror imaged
A
B
Mirror image button
Stitch can be mirror imaged along a vertical axis
by pressing the " " button except for stitches
30-49 from the Group 2-B stitches.
LED light will turn on. The machine will continue
to sew the reflected stitch until the mirror image
button is pressed again or the stitch is changed.
Elongation button
Group 2-B stitches 58-75 can be elongated up
to five times their normal length by pressing the
" " button, the LED light will turn on.
Combine different stitches in this group : change
width or length for a greater variety of stitches.
FUNCTION BUTTONS
INSTRUCTIONS
Stitches can be sewn in two parallel lines of the
same stitch with the twin needle.
Press the " " buttonthe LED light will turn on
and the machine automatically reduces the width
for twin needle sewing.
When using some straight stitches and the
needle position is set below 2.0, the width will
automatically move to 2.0mm.
Press the button again to return to single needle
sewing.
Note: Group 1-A stitch 0, 8, 9 and Group
2-B stitches 27-49 cannot be used with
twin needle function.
To Next Page
Loading...
Need help?
General
