Caution: Never leave machine unattended when plugged in.
Always unplug this machine from the electrical outlet immediately after using and before
maintenance.
CONNECTING THE MACHINE TO THE POWER SOURCE
Connecting the machine
Before connecting the power supply, make sure that the voltage and the frequency shown on the
machine is conforming to your electrical power.
Place the machine on a stable table.
1. Connect the power cord to the machine by inserting the plug into the power supply connector.
2. Connect the power cord plug to the electrical outlet.
3. Insert foot control plug into the foot control connector on machine.
* 001.The appliance must be used with foot control C-9
18
GETTING READY
To Next Page
Loading...
