Embroidery
5:30
Changing a single character in the written sequence
A single character which has been entered by mistake can be selected
and changed.
1. To do this, select the character that you want to change with Arrow
up icon (A) and touch the Automatic stitch building icon (D). The
Alphabet modifying window will open (F).
2. Touch the Change letter icon (E) to scroll backward or forward
through the alphabet.
If you confi rm your input with OK, the window closes and your
settings are saved.
If you touch ESC, the window closes and the process is cancelled.
E
D
A
F
To Next Page
Loading...
