Decorative sewing
4:7
Adjust an existing sewing sequence
An existing sewing sequence can be adjusted. By selecting an
individual stitch within a sequence or an entire sequence, you can do
adjustments according to your wishes.
1. To select an individual stitch, use the cursor arrows (A) to move
the cursor line in front of the stitch you want to adjust. The selected
stitch is surrounded by a frame.
2. Touch the Select stitches icon (B) to select a sewing sequence. If you
keep the icon depressed, all stitches will be selected.
3. A cursor line appears. Move it with the cursor arrows across the
stitches to select them. The selected stitches are surrounded by a
frame.
4. After selecting one or more stitches, you can modify all their
settings. What settings that can be changed depends on how many
stitches and what kind of stitches that are selected. Touch the More
options icon (C) to adjust the selected stitches or sewing sequences.
You can also delete one or more stitches, or delete the entire sewing
sequence.
5. If you move the cursor line over a previously selected stitch or
sewing sequence, the selection is cancelled. If you would like to
adjust another stitch, select it with the cursor arrows.
6. When you are satisfi ed with your adjustments, cancel the selection
with the select stitches icon (B).
Inserting a stitch in the sewing sequence
1. If you would like to insert a stitch in the sewing sequence, use the
cursor arrows to move the cursor line to the insertion point in the
sewing sequence.
2. The cursor must be positioned at the point where you wish to insert
the stitch.
3. Select a new stitch.
4. When the stitch has been inserted, the cursor moves to the end of
the inserted stitch.
Inserting a stitch at the start of a sewing
sequence
If you wish to insert a stitch at the beginning of a sewing sequence,
move the cursor line to the beginning of the sewing sequence and select
a new stitch.
The stitch is automatically placed at the start of the sewing sequence.
A
B
C
To Next Page
Loading...
Need help?
General
