Embroidery
5:33
Automatic stitch building
Small stitch patterns, such as 9 mm stitches or MAXI stitches from
the sewing machine or embroidery designs created with the creative
software or a creative card, can be combined to create borders with
different corner shapes.
For that purpose one or several pattern edges are doubled, tripled or
more and then positioned within the embroidery hoop.
In order to join the single pattern edges exactly, the grid should be
activated. Of course, all available programs and functions of the
embroidery combination can also be used with this function.
Description of icons
A. Automatic stitch building icon: Use this icon to change the general
stitch settings.
B. Use the - /+ symbols to set how many stitch patterns are repeated.
Working Steps
There are different ways of using this program to create your own
border designs. One possibility is described below using a 9mm
decorative stitch.
1. Click on the Mini main menu, touch the 9mm Decorative Stitches
and then touch the Leaves and fl owers icon. Choose stitch no. 161.
2. Place the stitch in the center of the hoop.
3. Touch the Automatic stitch building icon (A) to open the parameter
setting window.
4. Use the - / + symbols (B) to select how many times the stitch
pattern is to be repeated. Enter 5 stitch patterns.
If the stitch pattern length or width is altered, the length of each single
stitch will be changed.
5. If you confi rm with OK the window closes and the settings
are saved. With ESC you close the window, and the process is
cancelled.
A
B
To Next Page
Loading...
Need help?
General
