Embroidery
5:42
How to use the embroidery
template
An embroidery template comes with your 2170
which helps you to draw marking lines, to make
it easier to position designs on the fabric. When
you use the template you must ensure that the text
Pfaff can be read at the top right, and the two grip
depressions are situated on the left.
The template has a scale in mm and inches at the
sides. The embroidery fi eld is shown with slits.
Putting the embroidery in the
right place
Before hooping the fabric, select the embroidery
design and the correct hoop. Place the template
in the hoop. Slide the hoop onto the embroidery
arm. Touch the More options icon and the Precise
positioning icon. Touch the Corner indicator and
mark the corners of the embroidery with an erasable
pencil. Take your template and position the template
on the project or garment to be embroidered. When
the template is positioned, mark the hooping
placement lines on the project with a fabric marking
pen. Then when hooping the fabric, match the
marked line with the guide marks on the hoop.
How to sew several embroideries after one
another
1. If you want to sew several embroideries after
one another, your Pfaff template will be a great
help. Sew out your fi rst embroidery design and
remove the hoop from the embroidery unit. Put
the template into the hoop and draw the outlines
of the design.
To Next Page
Loading...
Need help?
General
