Sewing
3:19
Sewing on buttons
With stitch no. 59 you can easily sew on two and four-hole buttons.
1. Remove the presser foot and lower the feed dog.
2. Mark the button position on your fabric. Place the button on the
marked fabric.
3. Turn the handwheel towards you and position the button so the
needle enters the left hole in the button. Lower the presser foot
lifter.
4. The button will be held in place by the shank of the foot. Make sure
the needle also enters the right hole of the button.
5. Continue sewing on the button. The machine will complete the
program for you.
Eyelets
To stitch eyelets on a belt or linen items, select stitch no. 66.
1. Place a small mark wherever you would like to sew an eyelet.
2. Place the fabric under the presser foot, position one of the marks at
the center of the foot.
3. If the Stitch restart is touched during the sewing operation, the
machine will automatically sew one eyelet and tie off the stitch.
4. Cut a hole in the center of the eyelet. You can select from fi ve eyelet
sizes by touching the stitch length.
Stitch no. 66 can also be combined in embroidery stitch combinations
for beautiful embellishment.
To Next Page
Loading...
Need help?
General
