Sewing
Sewing mode functions
A. End to end mirroring
B. Side to side mirroring
C. Four directions sewing
D. Single Stitch
E. Immediate tie-off
F. Tie-off program
G. Tapering
H. Balance
I. Free-motion sewing
J. Twin needle
D. Single Stitch
Stitches and stitch sequences can be sewn as single stitches. By touching
the single stitch button you can decide how many patterns you want to
sew. When pressing this button a new window appears. Touch the ON
button (N) and you can decide how many pattern repeats you want by
touching + and - .
E. Immediate tie-off
If you touch the Immediate tie-off icon, either when sewing or when
the machine is stopped, the machine will not fi nish the stitch/sequence
but instead do an immediate tie-off.
Note: If you want to start from the beginning of your sequence again you need to press
pattern start.
After you have done an immediate tie-off the machine will stop and
will not start again until you have released the foot control and press it
down again.
The immediate tie-off icon remains active after being touched and
becomes inactive when the tie-off has been completed.
A
B
C
D
E
F
G
H
I
J
N
3:4
To Next Page
Loading...
Need help?
General
