Pfaff creative 4.5 User Manual

3:10
Presser foot pressure
Presser foot height
embroidery
PFAFF
®
creative
™
Color Touch Screen
7KUHDGWHQVLRQFRPSHQVDWLRQ
,I\RXÀQGWKDWWKHWKUHDGWHQVLRQQHHGVWR
be increased or decreased for most stitches or
embroideries, you can change the general setting
for embroidering and/or sewing. You may need to
adjust the thread tension controls if you regularly
sew or embroider on special fabric or use specialty
threads.
Touch Thread tension compensation. Adjust the
slider bars to generally increase or decrease the
thread tension for all stitches and/or embroidery.
Default setting is normal.
Once you have increased or decreased the value in
the Settings menu, the thread tension control icon
will change to green.
Note: Contact you authorized PFAFF® dealer if you
experience thread tension problems that cannot be helped
with the Thread tension compensation.
'\QDPLFVSULQJIRRW'IRUHPEURLGHU\
”Dynamic spring foot 6D for embroidery” function
is selected by default. When embroidering, using
the Dynamic spring foot 6D, make sure that the
”Dynamic spring foot 6D for embroidery” is
selected.
When another type of foot is used, e.g. presser
foot 6A, deactivate Dynamic Spring foot 6D for
embroidery in the Settings menu.
Presser foot pressure
In most cases, you do not need to adjust the presser
foot pressure. Specialty techniques may require
an adjustment. The higher the number the more
pressure on the fabric.
3UHVVHUIRRWKHLJKWHPEURLGHU\
Adjust the height of the presser foot in Embroidery
stitch-out mode. Use the + and - icons to either raise
or lower the height of the presser foot.
Some embroideries may build up under the presser
foot. If there is not enough space between the
presser foot and the embroidery, the top thread will
form loops on the underside of the embroidery.
Increase the presser foot height in small steps until
the embroidery moves freely under the presser foot.
Note: Because the Dynamic spring foot 6D measures the
fabric thickness, the option to adjust presser foot height in
embroidery is only available if Dynamic spring foot 6D
for embroidery is deselected.
Once you have increased or decreased the
value in the Settings menu, the thread
tension control icon will change to green.

Pfaff creative 4.5 Specifications

General

Display	Color touch screen
Automatic Thread Cutter	Yes
USB Connectivity	Yes
Stitch Width	9mm
Stitch Length	6mm
Type	Computerized Sewing and Embroidery Machine