8:11
Embroidery mode - edit
25
Basic Shape Creator™IHDWXUH
Shaping is a unique way to use your beautiful
built-in decorative stitches, sequences or even
small design elements to form new embroidery
designs.
Basic Shape Creator™ feature - overview
A Select shape
B Zoom
C Delete/Duplicate last object
D Enter number of designs
E Select control points
F Select spacing
G Select line positioning
H Select side positioning
I Select design angle
J Control points
K Baseline
Note: Duplicate/delete and enter number of designs
are not available when shaping an embroidery text.
If shaping text, you can use embroidery text editor to
adjust your text while shaping. Read more on page
8:21.
6HOHFWVKDSH$
Select a shape by touching it in the list (A). The
stitches or designs will be placed along the
baseline (K) in the order that they were loaded
into Embroidery edit. The stitches or designs
will follow the line in the direction indicated by
a small arrow in the icons in the select shape list.
Note: When selecting a new shape, all your custom
adjustments to the shape will be set to default.
'HOHWH'XSOLFDWHODVWREMHFW&
If you want to delete the last object in the shape,
touch the - icon. Only the last object in the shape
will be deleted.
If you want to add a copy of the last object, use
the + icon. The last object in the shape will be
duplicated and the copy will be added after the
last object on the baseline.
Note: If several designs are grouped before opening
Basic Shape Creator™ feature, the whole group will
be duplicated or deleted.
(QWHUQXPEHURIGHVLJQV'
Touch the enter number of designs icon (D) to
get a pop-up where you can enter the desired
total number of designs to be used in the shape.
F
J
I
G
J
H
K
B
C D
E
A
To Next Page
Loading...
Need help?
General
