4:13
Sewing mode
C
C
D
D
E
E
A
Sequencing
Stitch Creator™ feature
22
23
3DWFKZRUNSURJUDP&
The patchwork program makes it possible for you
to program an exact seam length that can be sewn
repeatedly. This is very useful when quilting.
To program a seam length, activate the patchwork
program (C). Sew your desired seam length and
press the reverse button. The action indicator on
the machine will be lit until the last repetition of
WKHVWLWFKLVÀQLVKHG7KLVZLOOVHWWKHOHQJWKRIWKH
seam. The length of the patchwork sequence is
VKRZQLQPLOOLPHWHUVLQWKHSUHYLHZÀHOG'
After you have programmed the patchwork
sequence, the patchwork program icon is inactive.
The single stitch program is now activated instead.
The programmed length of your patchwork can be
adjusted using the single stitch adjustment icons (E).
&RPELQLQJ7DSHULQJDQG3DWFKZRUN
RU6LQJOHVWLWFKSURJUDPV
Combining Tapering and Patchwork or Single stitch
programs makes it possible to repeat a tapered seam
with the same length.
Activate tapering by selecting any of the tapering
icons (A) then activate Patchwork by touching the
icon (C). Follow the instructions for tapering on the
previous page. When the reverse button is pressed
the action indicator will be lit until the taper and
ODVWUHSHWLRQRIWKHVWLWFKLVÀQLVKHG
The seam is now programmed and the single stitch
program is activated. When you start sewing again
the seam will automatically be repeated with the
same length.
The length of the seam is shown in millimeters in
WKHSUHYLHZÀHOG'%HWZHHQWKHDQGLFRQV(
the number of repetitions in the program is shown.
Use the + and - icons to adjust the length of the
seam.
Note: The tapering is included in the repetitions shown
on the screen.
6HTXHQFLQJ
Touch this icon to open sequencing. Read about
sequencing in chapter 5.
Stitch Creator™IHDWXUH
Touch this icon to open the Stitch Creator™ feature.
Read about the Stitch Creator™ feature in chapter 6.
To Next Page
Loading...
Need help?
General
