8.4.2 In program 1:
Entering the program speed you want
Precondition: Program 1 has been preselected as described under 1.2 to 1.3!
2.1 To enter the desired program speed in "Program 1"
press the PM key, (LED on) and press the TE key, (LED on)
2.2 Press the paging key until the display Fig. 8.2 appears
2.3 Using the A+ / A- keys, set the desired program speed for sewing program 1.
Note:
The desired program speed for sewing program 2 can be entered as described under 2.3 and 2.4.
However, this presupposes that program 2 has been preselected as described under 1.2 to 1.3!
The desired program speed for sewing program 3 can be entered as described under 2.3 and 2.4.
However, this presupposes that program 3 has been preselected as described under 1.2 to 1.3!
To enter other functions, continue working in programming mode.
To finish your entry
press the PM key, (LED off) and press the TE key, (LED off)
Fig. 8.2
Program speed
of sewing program 1
Number of seam sections
for sewing program 1
Subsequent program number
p4xpd-2-en 8.6 08-08-2
9
To Next Page
Loading...
Need help?
General
