Safety
9
Inspection after maintenance or repair work
After maintenance or repair work, make sure that all protective devices have been
installed and that they function correctly. Only when this is the case, the GSD 320 may
again be put into service.
Industry-specific accident prevention regulations
In all cases, the industry specific and local accident prevention regulations are applicable
to the GSD 320.
Disposal of the operating media
The operating media must be treated and disposed of in accordance with local
regulations.
Instructions
Based on these Operating Instructions, the owner shall prepare a set of instructions that
describe the activities and specifications required for safe operation.
These instructions shall be posted at a suitable place at the workplace and shall be
observed by all persons working with the equipment.
2.5 Gases
Adhere to the applicable regulations and take the necessary precautions for the process
media used.
Consider possible reactions between the materials and the process media.
If toxic or combustible gases are sampled with the GSD 320, the exhaust gases shall be
treated and disposed of in conformity with the applicable regulations.
2.6 Liability and warranty
Pfeiffer Vacuum assumes no liability and the warranty becomes null and void if the owner
or third parties:
Disregard the information in this document
Use the product in a non-conforming manner
Make any kind of interventions (modifications, alterations etc.) on the product
Use the product with accessories not listed in the corresponding product
documentation
The owner assumes the responsibility in conjunction with the process media used.
2.7 Training
Pfeiffer Vacuum offers application, operating and maintenance courses for the best use
of this product. Please contact your local Pfeiffer Vacuum representative.
To Next Page
Loading...
