10
ENTHOO ELITE
PREPARATIONS
The Enthoo Elite case is designed to support installation in
standing position. Make sure the case is standing stable while
building.
Don’t turn on the power to your system until installation is
complete.
Discharge your body’s static electric charge by touching a
grounded surface before performing any hardware procedure.
Make sure to consult the manuals of your hardware before
installation.
If you do not feel comfortable with performing the installation
procedure, consult a qualified computer technician.
GET STARTED
OPENING RIGHT SIDE PANEL
CLOSING RIGHT SIDE PANEL
2x
OPENING LEFT WINDOW PANEL
1
11
2
22
Take out the EVA-foam from the top cover of the
packaging to use as base for your hardware placement.
LOOSEN:
To Next Page
Loading...
