Phase Technologies SD Series - Page 36

30 | P a g e
Table 12 - Timers
TIMER
DESCRIPTION
Motor Run Time
Logs motor run time in hours.
Drive On Time
Logs time in hours the drive is energized
All Motor Hours
Logs total motor run time. Not resettable.
All Drive Hours
Logs total time the drive is energized. Not resettable.
Programming Tip
To reset the timers, navigate to the Main Menu item, CLEAR MEMORY, use arrow keys to select
RESET TIMERS, and then press ENTER.
Clear Memory
The CLEAR MEMORY function in the Main Menu allows you to reset the timers that record motor run
time and drive on time, and to reset the Restart Log which counts the number of each particular fault.
1. Press the MENU key to scroll through menu items until CLEAR MEMORY appears on the
display.
2. Press ENTER to enter this menu item.
3. Use the up and down arrows to find either RESET TIMERS or CLEAR RESTART LOG.
4. Press ENTER to reset the selected function.