37 | P a g e
5.4 All Parameters List
In order to aid in troubleshooting, a numbered parameter list containing all parameters is available for
use. Some parameters are visible that are not always used. In this case, the word “Disabled” is shown,
and programming functionality is disabled for that parameter.
Each parameter is numbered and ordered in the following order:
Table 13 - Parameter List
5.5 Changed Parameter List
A list of all parameters that have been changed from their default values. This allows for quick and easy
programming of previously changed parameter values.
Parameters that have been edited will show up in the same order as described in Table 13 above:
Operating -> Auto Restart -> Interface -> Constant Pressure -> Lead Lag.
The total number of changed parameters, and the current index of changed parameters, will be
displayed at the top of the screen. If there are no changed parameters, then “No Changed Parameters”
will be shown.
To Next Page
Loading...