151
16.4 Hasselblad 555 ELD
Ensure that the shutter release on the front of the Hasselblad 555 ELD
is in the DIG position when using a Phase One IQ back.
If for any reason you have to use the 555ELD in Film position (E.g. If the
DIG is not working) then set the IQ to Zero Latency.
Shutter Latency Setting
The IQ back can be used with both Normal and Zero latency with the
Hasselblad 555 ELD.
An IQ back has a default Normal latency setting that helps to save
battery life. But users may experience unwanted double exposures
when using a two-shot release cable.
Motor Cable on Hasselblad 555 ELD
A motor cable is not required when using an IQ back on a Hasselblad
555 ELD body.
To Next Page
Loading...
