157
17.3 More Details: Hasselblad H Series
Camera Display
The Hasselblad H1/H2 incorporates a screen that displays information
about the camera set-up. It shows the aperture value, AF mode, shutter
speed etc.
The Hasselblad H1/H2 will also display some IQ back information on this
screen. For example, error messages including ”Digital back storage
media is full” will be displayed on the screen if the CompactFlash in the
IQ back is full to capacity.
ISO Settings
The ISO value is also displayed on the H1/H2 camera screen. The
ISO setting can be adjusted from the camera back or in Capture One
software when shooting tethered.
Please consult page 61 of this manual for details on setting the ISO. Go
to page 53 for more information about tethered shooting.
Auto Exposure
All the Hasselblad H1/H2 auto exposure modes are fully supported by
the IQ back.
Please check the relevant Hasselblad H-series manual for more
information on exposure modes.
To Next Page
Loading...
