152
16.5 Hasselblad 553 ELX
When using the IQ back on some Hasselblad motorized bodies (i.e.
Hasselblad ELX or Hasselblad ELM series), a motor cable is supplied
to enable users to re the camera shutter from a computer using the
Capture One Pro Capture button. (See circled button left).
Cable Connections
The cable is connected between the multi-connector on the IQ back
and the DIN connector on the Hasselblad. Ensure that A or AS mode
are not used.
WARNING! Please note that the Phase One IQ back should not be
mounted while the camera is set to mirror up (S or RS modes). Make
sure that the lens is not jammed or locked open on the “B” setting when
connecting the ash sync cable to the Phase One IQ back.
Shutter Latency Setting
Set the latency setting to Normal on the IQ back while using a Hasselblad
553 ELX.
To Next Page
Loading...
