91
Power-Up and Down from 645DF+
1. Turn on the 645DF+, and the IQ2 back will automatically power up.
2. Turn off power on the 645DF+ and the IQ2 back will power down
after 10 seconds, unless it is interrupted manually on the screen or by
pushing a button.
This feature is not fail proof, and if operated quickly in sequence, the
back may not power on or off properly.
If you want to disable this feature - this can be acheived via the Power
Management menu.
7.5 Check Disk
A disk check is performed on every memory card that is inserted into
the IQ2 back. Phase One recommends leaving this feature turned on,
to maximize data security on the memory cards. This feature can be
deactivated in this menu. Read more about the Phase One Secure
Storage System (3S) on page 56 of this User Guide.
7.6 Storage Mode
This option allows users to congure how an IQ2 back should store the
captures created. Auto is the default storage setting and it will detect
and automatically store images les to a memory card if it has been
inserted in the IQ2 back.
If the IQ2 back is being used to shoot tethered, it will store image les
directly to the computer via the connected USB2.0 or FireWire 800
cable. The USB2.0 or FireWire will have priority if a card is in the IQ2
back at the same time as it is connected by USB2.0 or FireWire to a
computer.
N.B The IQ2 back can be made to shoot to either CompactFlash or
to a computer, via a FireWire 800 or USB2.0 or cable, by selecting CF,
USB2.0 or FireWire respectively. An Error Message will appear on the
IQ2 screen if the IQ2 back is not tethered to a computer and the IQ2
card slot is empty.
To Next Page
Loading...
Need help?
General
