PhaseOne 645DF+ - Page 41

41
One-push Shift Function
When the difference between the set value and metered value is displayed
on the viewnder LCD in the Manual “M” mode, press the AEL button
for approx. 1 second and the camera will automatically adjust the shutter
speed to achieve the correct exposure based on the set aperture value.
While the difference[B] between the set value[A] and the metered
value is displayed on the viewnder LCD, press the AEL button[C] for
approximately one second. The camera changes the shutter speed to
an appropriate level.
Auto Mode Mechanism
A leaf shutter’s working range is from 1/1600 sec. to 1 second. To
achieve other speeds (1/4000-1/800 sec., 1-60sec.., bulb) use the focal
plane shutter.
Synchro Mode (X)
Select this mode when a ash is used. Choose “X” and the shutter
speed will be xed at 1/125 second for synchronization.
NOTE:
The aperture level can be selected for
the parameter to shift.
NOTE:
Photography using the leaf shutter or
focal plane shutter can be selected in
custom settings
NOTE:
The selected aperture value can be
locked.
When 1/800 sec. shutter speed can
not be achieved even though the leaf
shutter lens is attached, try another
exposure mode.
A B
P
Av
Tv
M
X
CF
C1
C2
C3
C
P
Tv
Av
M
X
CF
C1
C2
C3
A
P
Av
Tv
M
X
CF
C1
C2
C3