iXM-GS120 Operation Guide
9. Storing Images
Page 25 of
9 Storing Images
To save images on a PC, you can:
• connect the camera with a USB 3.1 cable to a PC running iX Flight Pro, iX Capture, Phase One SDK or Capture One.
• use an XQD/CFexpress memory card as the storage device.
9.1 Using Memory Cards
• Memory cards are manufactured by external suppliers and Phase One is not responsible for defective cards.
• Phase One recommends testing all new memory cards by verifying that image files are properly stored on the card and
that they can be read on a PC.
9.1.1 Inserting and Ejecting a Memory Card
To insert a memory card:
1. Using a 2 mm hex key, remove the screw securing the memory card slot cover.
2. Remove the cover.
3. Insert a memory card with the brand label facing the camera rear.
To Next Page
Loading...
