PhaseOne iXM-GS120 - Camera Features and Specifications; Exposure Sequence

iXM-GS120 Operation Guide
3. Camera Features
Page 7 of
32
3 Camera Features
3.1 Exposure Sequence
The following figure and tables describe the signals and hardware pulses that control the exposure sequence.
Exposure Sequence
Exposure Sequence Signals
Signal
Description
Trigger In
The FMS signals the camera to capture an image.
System Ready
Camera ready/busy signal.
Mid-Exposure Pulse
Indicates the midpoint of the exposure time.
Black Reference/Wakeup Control
Dual-purpose signal.
Hardware Pulses and Delay Parameter Signals
Sequence Step Shutter = ES
Shutter = LS
Normal Mode
T1
Trigger IN – SysRdy (Low)
2.5 msec 2.5 msec
T2
Trigger IN – Mid Exposure
~20 msec +
0.5*Exposure Time
~25 msec +
0.5*Exposure Time
T3
Mid Exposure Width
0.5*Exposure Time 0.5*Exposure Time
T4
Trigger IN – SysRdy (High)
100 msec 122 msec
T5
Wakeup pulse (minimum)
1 msec 1 msec
T6
Wakeup pulse – Trigger IN (minimum)
350 msec 350 msec