PhaseOne iXM-GS120 - Miscellaneous Camera Settings; Setting Shutter, ISO, and Aperture; Setting Camera Date and Time; Setting Image Orientation

iXM-GS120 Operation Guide
11. Miscellaneous Camera Settings
Page 28 of
32
11 Miscellaneous Camera Settings
This section describes how to set common parameters using iX Capture.
Note
For more information about camera settings, see the iX Capture User Guide.
11.1 Setting shutter, ISO and Aperture
To set shutter, ISO, and aperture values:
1. Click SETTINGS.
2. Click the required camera tab.
3. Click IMAGE.
4. Set the required values.
11.2 Setting Camera Date & Time
To set the camera data & time:
1. Click SETTINGS.
2. Click the required camera tab.
3. Click SERVICE.
4. Modify the CAMERA DATE and CAMERA TIME.
You can also click SYNC TO PC to use the PC’s current date and time.
11.3 Setting Image Orientation
To set image orientation:
1. Click SETTINGS.
2. Click the required camera tab.
3. Click IMAGE.
4. Set the CAMERA ORIENTATION.
11.4 Setting GPS Time Mode & Receiver
To set GPS time mode & receiver:
1. Click SETTINGS.
2. Click the required camera tab.
3. Click GPS.
4. Set the GPS type and Baud rate.
5. Set whether to use the TIME IN WEEKS:SECONDS.