iXM-GS120 Operation Guide
8. Configuring Auto-Exposure Mode
Page 22 of
8 Configuring Auto-Exposure Mode
You can operate the camera in manual or auto-exposure mode.
In auto-exposure mode, the camera controls the following parameters:
• ISO
• aperture
• shutter speed
When auto-exposure mode is active, the camera reads the histogram of each image it captures and adjusts the exposure
parameters for the next image. The adjustments are in third-stop increments.
To toggle between manual and auto exposure modes:
1. Run iX Capture.
2. Click CAPTURE.
3. Click AUTO EXP or MANUAL EXP as required.
To configure auto-exposure mode:
1. Run iX Capture.
2. Click SETTINGS.
3. Click the required camera tab
.
4. Click IMAGE .
To Next Page
Loading...
