iXM-GS120 Operation Guide
12. Firmware
Page 30 of
12 Firmware
12.1 Installing the Firmware Updater
To install the Phase One Firmware Updater:
1. Download the Firmware Updater from www.phaseone.com/download-categories/ixm-firmware/.
2. Open and extract the zip file.
3. Save the FWUpdater.msi file.
4. Double-click FWUpdater.msi.
5. When installation wizard completes, click Start > Phase One > Firmware Updater.
12.2 Updating the Firmware
To update the iXM-GS120 camera firmware:
1. Connect the camera to the PC with a USB 3.1 cable.
2. Connect the power cable to the camera and to a power source.
3. Start Firmware Updater.
4. If displayed, click the link to download the firmware. The firmware is saved locally.
5. In the Select Firmware list, select the firmware that you want to update.
6. After downloading the new firmware, the Release Notes button is no longer grayed out.
7. Click Release Notes to download the release notes for the newest firmware.
8. To update the camera to the latest firmware, click Update.
Note
Before starting, make sure Firmware Updater is installed on your PC and the PC is connected to the Internet.
Firmware Updater automatically checks online for a new version of firmware and displays a download button if your camera
The firmware is written to the camera and a gear icon is displayed next to the MAIN component. A progress bar displays
the progress of the update.
To Next Page
Loading...
