3. Introduction to
the P - back
System overview
The Phase One P back is designed specifically to fit
on one of several brands or models of medium format
cameras.
This overview section will deal with generic features,
available in all these different models, like for example,
tethered or untethered operation, preview display
functions, the menu system controls (they all have
four buttons to control the settings in the back) etc.
Certain camera specific explanations are placed in a
special section later in this manual. These can be how
to attach the P back to the camera, how to install the
focusing mask provided, special cable connections
and other considerations.
You might want to look into the camera specific sec
-
tion before returning to the overview to learn about
your specific configuration needs.
Now lets take a look at the generic parts of the P back.
To Next Page
Loading...
Need help?
General
