6. Navigating
the P back
When the P back is turned on, the screen will always
be in its home display position or "Main screen".
Pressing and holding down the upper left button on the
back will also bring you to the Main screen, regardless
of where you are in the menu system.
The Main screen has an indicator in the top showing
remaining captures, and a battery indicator at the bot-
tom showing the remaining battery capacity.
When either indicator
reaches zero, it will start
blinking, to indicate that
either storage or battery
needs replacement be-
fore capturing any more
images.
The main screen also shows the current ISO setting,
white balance setting and IIQ Raw file format selected.
Menu buttons
The Phase One P back has four menu buttons to con-
trol the menu system on the display.
To Next Page
Loading...
Need help?
General
