Green light
When capturing an image the green light is blinking
rapidly to indicates that the P back is busy.
Constant green light comes on if the backlight of the
display is dimmed to indicate that camera is still ready
even though the screen is dimmed.
(The time before this happens can be set in the P back
and is described later under "Menu mode")
Red light
If the red light is on this indicates that the P back is
writing to the storage media.
The same indicator is located just beside the CF-card-
slot under the cover in the left side.
When the red light is on do not remove the card from
the card slot, as this can damage the formatting of the
card and image and data might be lost.
ISO Settings
The default film
speed of the P
back camera
back is ISO 50. However, this setting can be changed
to ISO 100, 200, 400 or 800 using the menu system
(when untethered) or in the Capture panel of the Cap-
ture One application (When tethered).
To Next Page
Loading...
Need help?
General
