Image orientation detection
The H 101 - P back CCD is positioned in landscape ori-
entation. Whenever an image is captured in portrait
position by rotating the camera, an internal sensor
detects this new position and the image will appear
correctly oriented on the LCD and in the Capture One
application.
IR filter on the CCD
The IR filter is placed on top of the CCD.
The filter may not be removed for several reasons.
● The focusing of the H 101 - P back camera back
will be damaged
● It is only possible to remount the filter without dust
in between the filter and the CCD if you have ac-
cess to special clean room facilities.
● The Phase One Product Warranty is terminated.
Camera orientation:
Images can be captured in all three positions - and will appear with
the correct orientation on the LCD and in the Capture One software.
To Next Page
Loading...
Need help?
General
